Electrical short circuits or short circuit bonds occur due to the existence of an electric current that deviates from the cable line that has been installed. Causing the flow of electric current to pass through the network is shorter than it should be.
Or technically, this short circuit trigger occurs because the electric current is cut off. There is a collision between a positive electric current and a negative electric current which causes an electric short circuit.
There are many triggers for short circuits. Here are some of the triggers for the formation of the short-circuit bond.
Incorrect cable connection
Cables whose connections are not perfect, have a great risk of electrical short circuits in buildings and residences. If the cable connection is not neat and the insulator on the cable is not tightly installed, the electric current in the cable can run out and cause a short circuit.
The socket has loosened
The next trigger for an electrical short is a loose socket. An outlet that is abnormal and no longer strong causes its quality to decrease. The working method is also not good anymore. Loose sockets can create sparks that cause electrical short circuits.
Low-grade electrical features
Electrical features that do not meet safety standards or are of low quality can increase the risk of an electric short circuit. Because the constituent components are very fragile and easily damaged. Therefore, you must make sure you are using an electrical device.
High temperature exposure
If an electrical feature is exposed to excessively high temperatures or is located near a heat source such as a fire, it may cause an electrical short. Until then, make sure the electrical feature is not located near a heat-generating source.
Incompatible cables
You must use a cable capacity that matches its use. That is, if you need electricity with a large enough voltage, make sure the capacity of the cable that carries the electric current is suitable and is not below the voltage you are using. This effort is one method of avoiding electrical short circuits.
Overloaded outlet
The socket in the form of a T stop is an electrical feature that is universally used for everyday needs. However, it is not uncommon for a short circuit to occur at the socket due to careless use.
One of the triggers for a short circuit is an overloaded socket. If there are too many wires plugged into the socket and pile up, they can generate heat. The large temperature comes from the electric current accumulated by the socket. Short circuits can also be intertwined.
Wet plug
Water is a substance that can conduct electricity. If an electrical feature is affected by a water spill, it can definitely cause an electric short circuit. Therefore, avoid all features and power sources from splashing water.